Description
We present our first 5 Crawler Park obstacles, this kit includes five obstacles with all levels of difficulty, each one of them gives you a different and surprising experience. Remember to share the best videos on our social networks with the tag @toyswd 😀.
You will enjoy assembling the obstacles made of 100% high-quality wood, from the beginning. You will receive a board with the pre-cut pieces, and you will only have to press slightly to remove them and carry on with the easy 3D assembly pieces, it’s not necessary to use adhesives or glues. Check the assembly instructions by scanning the QR code printed on the board..
This obstacles are designed to be fixed both on our puzzle-style paths by placing the obstacle in the anchor points and turning the keys of the obstacle to attach it, on top of our printed carpet or by screwing it on the desired surface.
Seesaw
Ready for balances? Well, the seesaw is the king, overcome this obstacle trying to get all four wheels to pass over the two gangways without any wheel falling off and without the car overturning when going down. This obstacle has two anchors for tilting gangways, a lower one for the more cautious and the higher one for the more experienced radicals. Carefully opening the chassis, itself, you can change the anchor without having to disassemble any part of the obstacle.
Axes crossing
A classic of 4x4 obstacles, the axes crossing challenges you to overcome the parallel trunks without the wheels leaving them. Get ready to turn at the exact moment to go straight while you have fun pushing your car's suspension travel to the limit.
Double-face
Designed for all cars, both standard and evolved, it is you who sets the limits according to the line you dare to do. BUT WHERE IS THE LIMIT OF YOUR CAR? The double lateral will help you to know the limits of your car while you enjoy the suspension travel and vertigo wheel lifts, prepare for surprise dumps.
Stage1
ATTENTION NOT FOR BEGINNERS! We present Stage 1, of EXPERT difficulty level, it is one of the obstacles with a more elaborate design so that your mini off-road experience is a real challenge. Before starting the climb through the logs you will have to study the line, if not the dump is assured.
IMPORTANT! This peculiar Crawler Park obstacle is removable to increase the level of difficulty, by turning the modules you will be able to have 4 tracks, each one requires its own technique to reach the end with all four wheels touching the ground, in the photos of the product we show it to you .
Be careful, the line is important but the level of acceleration is the secret to leaving with a smile on your face.
Uphill
THE DIFFICULT IS NOT GOING UP BUT GOING DOWN! The truth is that climbing involves driving technique mixing inertia and small steering turns, to achieve traction to reach the top, but the delicate descent challenges you to mix the brake with a point of acceleration. If you are one of those who reaches the roof before the wheels, do not worry, it is a professional level obstacle. You're finally going to make it!
You know the puzzle-style tracks and the Crawler Park carpet?
You can complement this kit of obstacles with our puzzle-style tracks to design your circuit 100% from scratch, or with our printed carpet that gives you off-road scale realism that you do not have at home, circulate along the tracks with a stone effect , mud, sand and grass as you climb through the Crawler park obstacles.
Also to enjoy it on top of our printed carpet or by means of screws on the desired surface.
What happens when we push an Off-Road car to the limit?
Improve your 4x4 skills with your Crawler Park models. The surprising realism when driving through our Crawler Park challenges you to overcome and balance testing climbs, side steps, dizzying descents, play with the inertia of the car, the traction and the direction of the steering wheel, learning how to regulate the amount of acceleration, and when to brake so as not to overturn the car.
Crawler Park is designed for all levels, 100% scalable and customizable for all tastes, configuring your circuit or track without limits, changing challenges as many times as you want. Each of our obstacles includes three fixation formats so that it doesn’t slip when running through them, a base with rotating keys for our puzzle-style paths, another with sharp pieces for the printed carpet, and finally a few holes for screwing on the desired surface.
REMEMBER! Get to the next level of the game by tilting and adding new inclinations to the surface of the obstacles to further complicate the challenge.
ATTENTION! We will be releasing new obstacles and paths periodically in our toys collection so you can expand your circuit. Don’t miss out on the mini decorative accessories to create your scale model with the maximum realism.
The Crawler Park models are aimed both to modeling and RC CRAWLER hobby lovers who give importance to scale realism, such as 4x4 car lovers who want to play with friends and family.
We know you like it, but isn’t it true that you’d like to race with friends? Don’t miss out our CRAWLER CHALLENGE, exciting parallel circuits in a challenge mode for two or more cars with identical obstacles for each participant. (REF. TWDCHA0001)
Who will reach the finish line first without overturning the car?
Before starting the game, read the documentation inside the box with the assembly instructions, warnings and maintenance of the product.
ATTENTION! Be careful with your hands during the process of removing the pre-cut pieces from the wooden board, sharp parts may be exposed.
- Our product range doesn’t include cars.
- Suitable for 1/24 and 1/18 scale cars, check measurements in the characteristics table.
- Each obstacle adds a duplication of the most delicate pieces for its replacement.
- Our range of products has been approved and certified in compliance with all safety measures, risk assessment and environmentally friendly recycling criteria. (Download certificates at www.crawlerpark.com).
- Product recommended for people over 14 years old.
Kit of 5 obstacles for 1/24 1/18 RC Crawler park circuit
We invite you to join us and discover the addictive 4x4 Off-Road miniature world with this kit, a small-scale experience with “real-scale” sensations, and the most incredible, without having to leave home, in your room, living room or garage, at any time and only in a few minutes you will be able to design your circuit and then enjoy your RC Unlimited CRAWLER.
We present our first 5 Crawler Park obstacles, this kit includes five obstacles with all levels of difficulty, each one of them gives you a different and surprising experience. Remember to share the best videos on our social networks with the tag @toyswd 😀.
You will enjoy assembling the obstacles made of 100% high-quality wood, from the beginning. You will receive a board with the pre-cut pieces, and you will only have to press slightly to remove them and carry on with the easy 3D assembly pieces, it’s not necessary to use adhesives or glues. Check the assembly instructions by scanning the QR code printed on the board..
This obstacles are designed to be fixed both on our puzzle-style paths by placing the obstacle in the anchor points and turning the keys of the obstacle to attach it, on top of our printed carpet or by screwing it on the desired surface.
Seesaw
Ready for balances? Well, the seesaw is the king, overcome this obstacle trying to get all four wheels to pass over the two gangways without any wheel falling off and without the car overturning when going down. This obstacle has two anchors for tilting gangways, a lower one for the more cautious and the higher one for the more experienced radicals. Carefully opening the chassis, itself, you can change the anchor without having to disassemble any part of the obstacle.
Axes crossing
A classic of 4x4 obstacles, the axes crossing challenges you to overcome the parallel trunks without the wheels leaving them. Get ready to turn at the exact moment to go straight while you have fun pushing your car's suspension travel to the limit.
Double-face
Designed for all cars, both standard and evolved, it is you who sets the limits according to the line you dare to do. BUT WHERE IS THE LIMIT OF YOUR CAR? The double lateral will help you to know the limits of your car while you enjoy the suspension travel and vertigo wheel lifts, prepare for surprise dumps.
Stage1
ATTENTION NOT FOR BEGINNERS! We present Stage 1, of EXPERT difficulty level, it is one of the obstacles with a more elaborate design so that your mini off-road experience is a real challenge. Before starting the climb through the logs you will have to study the line, if not the dump is assured.
IMPORTANT! This peculiar Crawler Park obstacle is removable to increase the level of difficulty, by turning the modules you will be able to have 4 tracks, each one requires its own technique to reach the end with all four wheels touching the ground, in the photos of the product we show it to you .
Be careful, the line is important but the level of acceleration is the secret to leaving with a smile on your face.
Uphill
THE DIFFICULT IS NOT GOING UP BUT GOING DOWN! The truth is that climbing involves driving technique mixing inertia and small steering turns, to achieve traction to reach the top, but the delicate descent challenges you to mix the brake with a point of acceleration. If you are one of those who reaches the roof before the wheels, do not worry, it is a professional level obstacle. You're finally going to make it!
You know the puzzle-style tracks and the Crawler Park carpet?
You can complement this kit of obstacles with our puzzle-style tracks to design your circuit 100% from scratch, or with our printed carpet that gives you off-road scale realism that you do not have at home, circulate along the tracks with a stone effect , mud, sand and grass as you climb through the Crawler park obstacles.
Also to enjoy it on top of our printed carpet or by means of screws on the desired surface.
What happens when we push an Off-Road car to the limit?
Improve your 4x4 skills with your Crawler Park models. The surprising realism when driving through our Crawler Park challenges you to overcome and balance testing climbs, side steps, dizzying descents, play with the inertia of the car, the traction and the direction of the steering wheel, learning how to regulate the amount of acceleration, and when to brake so as not to overturn the car.
Crawler Park is designed for all levels, 100% scalable and customizable for all tastes, configuring your circuit or track without limits, changing challenges as many times as you want. Each of our obstacles includes three fixation formats so that it doesn’t slip when running through them, a base with rotating keys for our puzzle-style paths, another with sharp pieces for the printed carpet, and finally a few holes for screwing on the desired surface.
REMEMBER! Get to the next level of the game by tilting and adding new inclinations to the surface of the obstacles to further complicate the challenge.
ATTENTION! We will be releasing new obstacles and paths periodically in our toys collection so you can expand your circuit. Don’t miss out on the mini decorative accessories to create your scale model with the maximum realism.
The Crawler Park models are aimed both to modeling and RC CRAWLER hobby lovers who give importance to scale realism, such as 4x4 car lovers who want to play with friends and family.
We know you like it, but isn’t it true that you’d like to race with friends? Don’t miss out our CRAWLER CHALLENGE, exciting parallel circuits in a challenge mode for two or more cars with identical obstacles for each participant. (REF. TWDCHA0001)
Who will reach the finish line first without overturning the car?
Before starting the game, read the documentation inside the box with the assembly instructions, warnings and maintenance of the product.
ATTENTION! Be careful with your hands during the process of removing the pre-cut pieces from the wooden board, sharp parts may be exposed.
- Our product range doesn’t include cars.
- Suitable for 1/24 and 1/18 scale cars, check measurements in the characteristics table.
- Each obstacle adds a duplication of the most delicate pieces for its replacement.
- Our range of products has been approved and certified in compliance with all safety measures, risk assessment and environmentally friendly recycling criteria. (Download certificates at www.crawlerpark.com).
- Product recommended for people over 14 years old.
Data sheet
- Scale
- 1/18 scale
1/24 scale - Suitable for cars with a maximum width
- 5in / 130mm
- Product box size
- 75x4x38cm
Video presentation